Adtran Router Login Guide

By the 19216811 Editorial Team · Updated August 2026

Quick answer: Adtran makes fiber and business gateways, so logins vary by model. Most open at 192.168.1.1 with admin and admin. Some use 10.10.10.2 or unusual defaults. The label or your provider has the exact details.

Adtran is a telecom brand built for fiber and business networks, not retail shelves. A technician often installs it. Logins vary more than on consumer routers, so a short checklist helps. Here are the 2026 steps.

Other gateways? See our Technicolor, Sagemcom, and Hitron login guides.

Adtran Is Built for Fiber and Business

Adtran is different from the usual home-router brands. It builds carrier-grade fiber gateways and business routers. Your unit likely came from a regional fiber provider, installed and configured by their technician.

Because a provider sets it up, the login may already be changed. Try the common defaults first, but keep your provider’s details handy in case the standard admin login does not work.

Several Default Logins to Try

Adtran does not use one fixed login. The address and password change across models. The quickest path is to try the common combinations in order before you reach for a reset or a support call.

Adtran uses several default logins depending on the model and provider. Work down this list in order, and remember the sticker or your provider has the exact details for your unit.

Login option	What to enter	When to try
Standard	192.168.1.1, admin, admin	Try this combination first
Business models	10.10.10.2, admin, password	On some business gateways
Some fiber units	192.168.190.1, adm1n, blue1socket	An unusual factory default
Alternate	10.0.0.1, admin, password	If the others fail
The label	Details on the sticker	Always the exact source

Adtran gear is often installed by a technician, so your provider can confirm the login too.

Log In Step by Step

These four steps get you into the gateway.

1. Connect to the Adtran by Wi-Fi or cable.
2. Open a browser and type 192.168.1.1.
3. Enter a username and password to try.
4. Select Log In to open settings.

Change Your Wi-Fi Name and Password

After login, updating your Wi-Fi is quick.

1. Open the Wireless or Wi-Fi menu.
2. Enter a new network name.
3. Set a strong new password.
4. Save and reconnect your devices.

If the Page Will Not Open

Because Adtran uses several addresses, a wrong one is the top cause of a missing page. Try each address in the table, then run these checks before you reset or call your provider.

These four checks fix most cases.

• Confirm you are on the Adtran network.
• Try 192.168.1.1, then 10.10.10.2.
• Type the address in the bar, not search.
• Restart the gateway and wait a minute.
• 192.168.0.1 login guide

Reset an Adtran Gateway to Factory Settings

A reset restores factory defaults and erases your settings, including provider tweaks. On fiber units, you may need the provider to reprovision service. Hold the reset button for about fifteen seconds.

Follow these steps to reset it.

• Keep the gateway powered on.
• Press the reset hole with a pin.
• Hold about fifteen seconds until it restarts.
• Log in with a default combination.

Frequently Asked Questions

What is the default login for an Adtran router?

Most use admin and admin at 192.168.1.1. Some use 10.10.10.2 with admin and password, or unusual defaults. The label or your provider has the exact details for your unit.

Why does Adtran have so many default logins?

Adtran builds many models for different providers and networks. Each line can ship with its own address and password. That is why a short checklist works better than a single default.

What are the adm1n and blue1socket credentials?

Those are an unusual factory default on some Adtran units, at 192.168.190.1. The username is adm1n with a one, and the password is blue1socket. Type both exactly as shown.

Is Adtran a home or business router?

Mostly business and fiber. Adtran builds carrier-grade gateways that regional providers install for homes and offices. The login steps are the same, but a technician often sets it up first.

I forgot my Adtran password. What now?

Try the common defaults and the label first. If none work, hold the reset button for about fifteen seconds. On fiber units, your provider may need to reprovision the service.

Can I log into an Adtran gateway from my phone?

Yes. Join the Adtran Wi-Fi, open a browser, and type 192.168.1.1. Enter a username and password from the list. The steps are the same as on a computer.

Related Brand Guides

On a different gateway? These guides help too.

• Technicolor Router Login Guide
• Sagemcom Router Login Guide
• Hitron Router Login Guide
• Huawei Router Login Guide
• Secure your home Wi-Fi (CISA)

Bottom Line

Adtran is fiber and business gear, so try a short list of logins. Start with admin and admin at 192.168.1.1, then the label or your provider. Reset for fifteen seconds only as a last resort.