Humax Router Login Guide

By the 19216811 Editorial Team · Updated August 2026

Quick answer: Humax routers open at 192.168.1.1, with admin and admin as the default login. Some models use 192.168.0.1. Note that Humax also makes TV boxes, so make sure you are logging into the router.

Humax is a familiar name on TV set-top boxes, but it also builds Wi-Fi routers and gateways. This guide is about the router, not the TV box. Here are the current 2026 login steps.

Other gateways? See our Sercomm, Arcadyan, and Sagemcom login guides.

Humax Routers vs Humax TV Boxes

Humax router login page open in a web browser

This is a common mix-up. Humax makes both Freeview or Freesat TV boxes and internet routers. A TV box has no Wi-Fi login page. Only the router or gateway opens an admin page in a browser.

Router models look like HGB10R or HG100R, often supplied by an internet provider. If your Humax connects your home to the internet, this guide is the right one for you.

Default Login and the Label

Humax router admin login screen with username and password fields

Most Humax routers use admin and admin at 192.168.1.1. Some use 192.168.0.1 instead. If a provider set it up, the login may differ, so the label is the reliable backup.

The label sits on the base or back of the router. It lists the address, username, and password, plus the Wi-Fi name and key. Enter the details exactly, since they are case-sensitive.

Log In Step by Step

Humax router connected to a device by Wi-Fi or Ethernet

These four steps get you into the router.

  1. Connect to the Humax by Wi-Fi or cable.
  2. Open a browser and type 192.168.1.1.
  3. Enter admin and admin, or the label.
  4. Select Log In to open settings.

Change Your Wi-Fi Name and Password

Humax admin panel wireless settings for changing the Wi-Fi name and password

After login, updating your Wi-Fi is quick.

  1. Open the Wireless or Wi-Fi menu.
  2. Enter a new network name.
  3. Set a strong new password.
  4. Save and reconnect your devices.

If the Page Will Not Open

If the page does not load, first make sure you are on the router, not a TV box. Then confirm the address and connection. These checks solve most cases before a reset.

Work through these four checks.

  • Confirm you are on the Humax router network.
  • Try 192.168.1.1, then 192.168.0.1.
  • Type the address in the bar, not search.
  • Restart the router and wait a minute.
  • 192.168.0.1 login guide

Reset a Humax Router to Factory Settings

Humax router reset button for recovering a forgotten admin password

A reset returns the router to factory defaults and erases your settings. Use it if the login fails. Hold the reset button with a pin for about fifteen seconds until it restarts.

Follow these steps to reset it.

  • Keep the router powered on.
  • Press the reset hole with a pin.
  • Hold about fifteen seconds until it restarts.
  • Log in with admin and admin.

Frequently Asked Questions

What is the default login for a Humax router?

Most use admin and admin at 192.168.1.1. Some models use 192.168.0.1 instead. If a provider supplied the router, the login may be on the label rather than a simple default.

Is my Humax a router or a TV box?

If it connects your home to the internet with Wi-Fi, it is a router. If it plugs into your TV for Freeview or Freesat, it is a set-top box with no login page.

What IP address does a Humax router use?

Most use 192.168.1.1. Some use 192.168.0.1. The exact address is on the label. Type it into your browser after joining the Humax Wi-Fi to reach the login page.

My Humax was given by my ISP. Does that change the login?

It can. Providers sometimes set a unique password printed on the label. Try admin and admin first, then use the label details if that fails.

I forgot my Humax password. What now?

Try admin and the label password first. If both fail, hold the reset button for about fifteen seconds. The router returns to defaults so you can log in again.

Can I log into a Humax router from my phone?

Yes. Join the Humax Wi-Fi, open a browser, and type 192.168.1.1. Enter admin and admin, or the label details. The steps match what you would do on a computer.

On a different gateway? These guides help too.

Bottom Line

First confirm your Humax is a router, not a TV box. Then open 192.168.1.1, log in with admin and admin, or use the label. Reset for fifteen seconds if you are locked out.

Was this guide helpful?